EPoX a posté récemment une nouvelle série de bios destinés à ses cartes mères pour processeurs Intel et AMD. Voilà donc des liens vers l’ensemble de ces bios :
Cartes mères Pentium 4
EP-4B2A - EP-4B2M - EP-4B2M+ : Version 4b2a2625.bin Fixes:
* After resuming from S3 ACPI status the CPU temperature is not detected correctly, solved
* Added support for the 'Watch-Dog' function in the Clock-gen
* Added support for Celeron core CPU’s EP-4BDAE : Version 4bde2626.bin Fixes:
* When using 533 MHz FSB the PCI/AGP clock is shown incorrect, solved
* SPD memory detection improved
* Thermal resistor readout improved
* When CAS late ncy is 3, system is unable to boot, solved
* When CMOS is cleared the CPU ratio is not reset, solved
* Added 'Watch-dog' function in Clock-gen
* After resuming from S3 ACPI status the CPU temperature is not detected correctly, solved
* Added support for CPU533MHz / DRAM 354 MHz. EP-4BDAV2 : Version 4bdv2626.bin Fixes:
* When using 533 MHz FSB the PCI/AGP clock is shown incorrect, solved
* SPD memory detection improved
* Thermal resistor readout improved
* When CAS latency is 3, system is unable to boot, solved
* When CMOS is cleared the CPU ratio is not reset, solved
* Added 'Watch-dog' function in Clock-gen
* After resuming from S3 ACPI status the CPU temperature is not detected correctly, solved
* Added support for CPU533MHz / DRAM 354 MHz. EP-4BDM / EP-4BDM+ : Version 4bdm2626.bin Fixes:
* When using 533 MHz FSB the PCI/AGP clock is shown incorrect, solved
* SPD memory detection improved
* Thermal resistor readout improved
* When CAS latency is 3, system is unable to boot, solved
* When CMOS is cleared the CPU ratio is not reset, solved
* Added 'Watch-dog' function in Clock-gen
* After resuming from S3 ACPI status the CPU temperature is not detected correctly, solved
* Added support for CPU533MHz / DRAM 354 MHz.
* The BIOS now reports PC3200 at POST if the memory is running over 200 MHz. EP-4SDA / EP-4SDA+ : Version 4sda2626.bin Fixes:
* Added Intel Celeron CPU strings in the BIOS for proper detection at POST
* Highpoint BIOS updated to version V2.32
* Onboard Audio detection problems solved
* CPU ratio detection problems solved
* 'insert' key function problem solved
* When DRAM clock is over 200 MHz. the BIOS will detect it as PC3200 EP-4BEA / EP-4BEAR : Version 4bea2628.bin Fixes:
* When using 533 MHz FSB the PCI/AGP clock is shown incorrect, solved
* Thermal resistor readout improved
* When CMOS is cleared the CPU ratio is not reset, solved
* Added 'Watch-dog' function in Clock-gen
* After resuming from S3 ACPI status the CPU temperature is not detected correctly, solved
* Added support for CPU533MHz / DRAM 354 MHz.
* Supports Magic Health when1 using full-screen logo
* When using an USB card-reader the system hangs at POST 50, solved Cartes mères Socket A
KT133M / KT133M+ : Version KT0M2624.bin Fixes:
* Added ability to disable AC97 speaker during POST
